click images to enlarge...

Carnegie Museum of Art Pittsburgh PA

Project Description:

Art in glass…glass in art. Alex Da Corte’s “Rubber Pencil Devil” marks the artist’s contribution to the 57th Carnegie International Exhibition.This minimalist structure — 16 feet high by 22 feet long by 16 feet wide — was constructed with aluminum beams and supports that rise to a pitched roof. Covering over 350 square feet inside the “house” Lucid’s transparent glass flooring with neon lighting below was the perfect material to complete the artist’s vision for this amazing exhibit.


Product Used:

Tempered Laminated Low Iron Glass with Lucid’s UL Approved Slip Resistant Walking Surface. Due to the large size of these panels, SentryGlas Plus (SGP) was used as the interlayers between the glass to add strength and stiffness.


Designer:

Artist - Alex DaCorte


Related to:


Lucid Flooring


Rhode Island Veterans’ Home Community Living Center

Project Description:

Artist Deborah Baronas was commissioned to install 7 feature paintings of themes and images drawn from interviews with RI Veterans. The artwork was overlaid with large glass panels employing a variety of techniques.


Product Used:

Low Iron Glass with Digital Imagery printed with ceramic ink. Low Iron Glass with Digital Imagery etched on the glass surface.


Designer:

Baronas Art


Related to:


Digital Ceramic Ink


Private Residence -    Phila PA

Project Description:

A dated roof deck needed upgrading. During the design phase the challenge was what to do with the skylight below the deck. The solution was a slip resistant transparent Lucid glass deck panel to allow the flow of daylight into the living space below. Click the thumbnail images to see before and after photos.


Product Used:

3-Ply tempered laminated Standard Clear glass with Lucid’s UL approved slip resistant walking surface.


Related to:


Lucid Flooring


Our Lady of Fatima Hospital

Project Description:

Attractive use of glass to promote the new corporate logo in a high traffic lobby area.


Product Used:

Tempered Laminated Glass with Sentryglas Expressions Printed Interlayer and Diffuser Backlit


Glazier:

LGS - SPD


Related to:


SGX Laminate


Private Residence - Boston MA

Project Description:

A luxury condominium in Boston was recently renovated creating an opportunity to rehab the master suite. The architect wanted to utilize all available space so the walk-in shower and water closet were designed using etched glass for privacy and sliding doors to conserve space. The architect also wanted glass throughout so glass panels were used for the ceiling as well, visible in some of the gallery photos.


Product Used:

1/2” Acid Etched Low Iron tempered and Laminated Glass


Glazier:

LGS - SPD


The Coster Ave Mural in Gettysburg

Project Description:

The original paint on wood mural created in 1988 memorialized one of many battles fought during the civil war in the Gettysburg area. After seeing the mural deteriorate over the years, artist Mark Dunkelman consulted with Lucid Glass Studio to find a more permanent mural material. The solution was re-printing the original mural image “direct to glass” for a long lasting durable memorial to the local battlefield. (Before and after photos in our gallery)


Product Used:

Direct to glass digital printing on 1/2” low iron tempered glass


Designer:

Mark H Dunkelman


Glazier:

LGS - SPD


Related to:


Digital Ceramic Ink


Private Residence - Jamaica Plain MA

Project Description:

This single railing panel acts as a divider between the foyer and living room of this single family residence. The home owner and designer were looking for an organic accent to the wide open space with obscurity upon entering the home. The answer was a Kiln Cast Glass panel with our “Jetty” texture.


Product Used:

1/2” Tempered Low Iron Kiln Cast Glass with “Jetty” Texture


Designer:

Robert Amendolara


Glazier:

LGS - SPD


Related to:


Jetty


Private Residence - Plymouth MA

Project Description:

This oceanfront home continued their beach motif by adding cast textured shower enclosures to the bathrooms featuring obscurity with an aquatic touch.


Product Used:

3/8” Tempered Low Iron Glass with Custom Fish Artwork on “Ocean Spray” and “Sea Grass” Textures


Architect:

Lukez Architecture


Related to:


Ocean spray

Seagrass


Inst for Advanced Studies - Princeton NJ

Project Description:

Wanting to dress up a dining hall renovation project HMR Architects consulted with Lucid Glass Studio to create tray slides for the servery in kiln cast glass. The result is a bright serving space in Simons Hall with spectacular glass tray slides enhanced with under mounted LED lighting. LGS was able to form the necessary ribs on top to guide the serving trays and texture the bottom surface to refract light.


Product Used:

Custom Kiln Cast 3/4” Standard Clear Glass “Meander” and “Sandbar” Textures


Architect:

HMR Architects


Photo Credit:

Michael Slack Photography


Related to:


Sandbar

Meander


Private Residence - Southwest Ranches FL

Project Description:

The architect used Lucid Glass Flooring to enhance the beautiful water feature bridge at the entrance to this lovely home in Florida. The green hue of the standard clear glass fits well with the contrasting dark and light colors at the front of the home.


Product Used:

Transparent UL Approved Slip Resistant Walking Surface - 3-Ply Tempered/Laminated Standard Clear Glass - Lucid Glass Flooring


Architect:

Krent Wieland Design


Glazier:

Aqua Escapes

Landmark Custom Homes


Related to:


Lucid Flooring

Installation Materials


Private Residence - Boston MA

Project Description:

Typical of many historical cities, homes were built with common walls, limited windows and multi-levels. This homeowner wanted to build a rooftop deck to enjoy the Boston skyline but was concerned with covering an existing skylight. His solution was a Lucid Glass Flooring panel in the deck to allow natural daylight to flow below into the living space.


Product Used:

Lucid Glass Flooring with standard clear glass and “Sandbar” texture to create obscurity and Lucid’s UL approved slip resistant walking surface


Related to:


Sandbar

Cast Textured

Lucid Flooring


Roger Williams Hospital - Providence RI

Project Description:

With the intent to create an interesting wall feature in a large open hospital lobby, the designer chose Lucid’s kiln cast glass to add motion. The glass wall welcomes visitors to the main entrance of this urban hospital in the Smith Hill neighborhood of Providence.


Product Used:

1/2” Low Iron Glass with Lucid’s kiln cast “Riptide” Texture


Designer:

Robert Amendolara Associates


Glazier:

Lucid SPD


Related to:


Riptide


Pierce Boston Luxury Tower

Project Description:

Combing light and color, the architect created an interesting partition wall on a private work out level of a 30 story luxury condo tower in Boston’s Fenway neighborhood.


Product Used:

Tempered Laminated Partition with Custom Blue Interlayers


Architect:

CBT Architects


Glazier:

Oasis Specialty Glass


Photo Credit:

Chris Dearborn


Pierce Boston Luxury Tower

Project Description:

At this luxury residential tower, the architect envisioned moving water flowing through the two hundred square foot executive level conference/dining room. By combining our kiln formed textured glass with Lucid’s slip resistant flooring, LED lighting and the color blue, the vision of flowing water came to life as soon as the glass was set in place. This project was nominated and won the 2018 Glass Magazine award for Most Innovative Glass Floor or Stairs. (Link below under designer)


Product Used:

Flooring: Tempered, laminated Low Iron Glass with Lucid’s slip resistant walking surface, “Riptide” kiln cast texture

Wall: Tempered, laminated Low Iron Glass with “Riptide” kiln cast texture


Designer:

2018 Glass Magazine Award Link


Architect:

CBT - Cambridge MA


Glazier:

Oasis Specialty Glass


Photo Credit:

Chris Dearborn


Related to:


Riptide

Lucid Flooring

LED Lighting


Private Residence - Statesville NC

Project Description:

In consultation with a creative homeowner, LGS provided a 48” circular glass flooring panel to act as a viewing portal into the clear waters of Lake Norman in NC. Using Lucid’s glass flooring, combining clarity/transparency and slip resistance they achieved the desired result of a private real life fish viewing aquarium. “Fish Movie” Link


Product Used:

Lucid Glass Flooring 3-Ply Tempered laminated Low Iron Glass with UL Approved slip resistant walking surface and LGS provided installation materials


Related to:


Installation Materials

Lucid Flooring


Private Residence -  Cohasset MA

Project Description:

This project was a complete renovation of an industrial building transforming it into a contemporary lofted residential living space. The designer took advantage of the well lit loft area by incorporating two large Lucid Glass Flooring panels that permit the natural light to flow to the first floor. Lucid’s transparent slip resistant walking surface provides unobstructed views from above and below.


Product Used:

Lucid Glass Flooring - 3-Ply Tempered, Laminated Low Iron Glass - Lucid’s Installation kit


Glazier:

Lucid - SPD


Related to:


Lucid Flooring

Installation Materials


Private Residence – Chatham, MA

Project Description:

Private Residence – Chatham, MA

(16) Glass Panels:

All: 1/2” Low Iron, Tempered, Flat Polished edges

Includes: 68 holes for one-sided handrails and stair treads

Hardware: Facia Mount & Base Shoe

- All other hardware & mounting prep by: Concentric Fabrication


South Street Landing - Providence RI

Project Description:

The historic “Dynamo House” was redeveloped into teaching space for local universities in Providence. The large common area contains a massive concrete generator foundation which had two openings to accommodate machinery. Instead of covering the openings, the architect used Lucid’s Acid Etched Glass Flooring to allow natural light to flow into the space below the concrete.


Product Used:

Three ply tempered laminated Acid Etched Low Iron Glass with “Diamond Plate” pattern


Related to:


Acid Etched


Private Residence - Hingham MA

Project Description:

The designer and homeowner had a goal to accent a bright kitchen renovation with an interesting centerpiece. By combining a thick glass bar top and thin textured glass backspashes they achieved the look and color they were after without the need for added LED lighting.


Product Used:

Bar Top: 1-1/2” Thick Fused Low Iron Glass with “Ocean Spray” texture

Backsplashes: 1/4” Low Iron Glass with “Sandbar” texture


Glazier:

Lucid SPD


Related to:


Ocean spray

Sandbar

General Thick Fused


Sculpture “Due West” - Cary NC

Project Description:

The artist had an inspiration to combine a deep red glass with sculpted stone in a massive piece with a beautiful outcome.


Product Used:

3/4” Thick Kiln Cast Ruby Red Sea Glass


Designer:

Phil Hathcock


Related to:


Seaglass

Sea Glass Colors


Private Residence - South County RI

Project Description:

A thick fused tabletop with organic textured edges adds a personal touch to this beautiful kitchen space.


Product Used:

1-1/2 Thick Fused Low Iron Glass with organic textured edges


Related to:


Fused


Private Residence - Biddeford ME

Project Description:

Thick fused Island Top brightened up this kitchen in Biddeford ME. An interesting shaped, textured edge provides uniqueness for this homeowner.


Product Used:

1-1/2” Thick Kiln Fused Low Iron Glass with organic textured edges


Related to:


Fused


Private Residence - Waterford CT

Project Description:

This homeowner was intrigued by what she found in our project gallery when she was in the design phase of a kitchen renovation. She fell in love with our “Riptide” texture in thick fused glass for her kitchen island top. Her only decision was whether to use LED lights or draw color from the décor and use it as the substrate under the glass. The result is gorgeous in this bright kitchen.


Product Used:

1-1/2” Kiln Fused Low Iron Glass with “Riptide” texture and flat polished edges.


Glazier:

LGS - SPD


Related to:


Fused

Riptide


Private Residence - Swampscott MA

Project Description:

The designer was intent on creating a very interesting focus on the bar area in this entertainment room in a north shore home in metro Boston. Lucid’s kiln formed glass countertop with LED lighting produced a one of a kind interior design.


Product Used:

1-1/4 Thick Kiln Cast Recycled Glass with flat polished edges and LED lighting


Glazier:

LGS - SPD


Related to:


Recycled


Private Residence - So Kingstown RI

Project Description:

This contemporary kitchen design was enhanced with the clean look of a textured backsplash that had been silvered.


Product Used:

1/4” Low Iron Glass - Kiln formed with Lucid’s “Ocean Spray” texture - silver back paint


Glazier:

Lucid - SPD


Related to:


Ocean spray


Centerbrook Architects HQ - Centerbrook CT

Project Description:

Centerbrook Architects, located in an old mill building had tapped into water power by installing a water turbine in their basement. Being located below their lobby they decided a glass floor panel would be an interesting way to view the turbine and explain the whirring noise visitors were experiencing. Lucid Glass Studio provided a solution using low iron glass and our unique slip resistant walking surface resulting in a very clear and transparent viewing portal.


Product Used:

Lucid Glass Flooring - Tempered, laminated low iron glass with Lucid’s UL approved slip resistant walking surface


Designer:

Centerbrook Architects - Ron Campbell


Architect:

Centerbrook Architects


Photo Credit:

Centerbrook Architects


Related to:


Lucid Flooring

Installation Materials


Private Residence - Charlestown RI

Project Description:

To brighten up the breezeway from garage to home, the architect included a glass canopy in his design for this RI home.


Product Used:

9/16” Tempered laminated glass with custom aluminum framework


Architect:

Jonathan Chambers Architects



Glazier:

Lucid - SPD


Private Residence

Project Description:

This project was uniquely designed using thick fused glass for the kitchen island top and front as well as the range area countertop. An added feature is a textured cast glass backsplash accented with LED lighting.


Product Used:

1-1/2” Kiln Cast low iron glass with “Riptide” texture - countertops

1/2” Kiln Cast low iron glass with “Riptide” texture - backsplashes


Related to:


Riptide


Private Residence - Narragansett

Project Description:

The homeowner remodeled two bathrooms in this beachside summer home. The bathrooms were small and only required spray panels to enclose the shower areas. To dress up the bathrooms and enhance the tile work they choose our Ocean Spray cast textured glass for the spray panels.


Product Used:

3/8” Standard Clear Tempered Glass with “Ocean Spray” cast texture


Glazier:

Lucid -SPD


Related to:


Ocean spray


Private Residence - Duxbury MA

Project Description:

The designer of this kitchen remodel incorporated thick glass and concrete into the center workspace and bar top. In lieu of LED lighting, she selected silver back-paint on the bottom surface of the bar top to highlight the interesting contours of the kiln formed glass.


Product Used:

I-1/2” Thick fused low iron glass with “Riptide” kiln cast texture and silver back paint


Designer:

Dawn Williams - Dawn Decorates, Plymouth MA


Glazier:

Lucid SPD


Related to:


Riptide

Fused


Food Service Cases

Project Description:

We have fabricated many UV Bonded glass enclosures for the food service industry. A few examples have been highlighted here.


Product Used:

UV Bonded Low Iron Glass


Related to:


UV Bonded Glass


Private Residence

Glazier:

Lucid - SPD


Related to:


UV Bonded Glass


Retail Display Case

Related to:


UV Bonded Glass


Private Residence - Newport, RI

Project Description:

Lucid Glass Studio fabricated these beautifully designed model yacht display cases for a homeowner in Newport, RI.


Product Used:

3/8” Low Iron Glass - UV Bonded


Glazier:

Lucid - SPD


Related to:


UV Bonded Glass


Chicago Style Glass Elevator

Private Residence -  Alburtis PA

Project Description:

The design intent for this project was to allow natural daylight to flow down from a roof top skylight into a space two levels below. We created a kiln cast textured bottom surface of the glass floor panel to give it a unique organic look while still providing maximum light transmittance.


Product Used:

Tempered Standard Clear laminated glass with Lucid’s UL approved slip resistant top surface. The bottom glass surface has our kiln cast “Coral” texture creating obscurity.


Designer:

Red Square Studio - New York


Related to:


Coral

Lucid Flooring

Cast Textured


Private Residence - Belmont MA

Project Description:

​A satin wall of privacy. Twin acid etched enclosures for both the shower and WC.


Product Used:

​1/2” acid etched on clear glass.


Glazier:

​Lucid - SPD


Related to:



Private Residence - Lake Worth FL

Project Description:

For this project we made our 1 ­1/4” Crystal Clear Flooring “in the round” as walkable skylights. Three diameters were used, 18”, 30” and 42”. Installation by Miller’s Custom Metals in Lake Worth, FL.


Product Used:

Tempered Laminated Low Iron Glass Flooring


Glazier:

Miller’s Custom Metals


Related to:


Lucid Flooring


7 World Trade Center - New York City

Project Description:

Sky Water commissioned art piece at 7 World Trade Center in NYC


Product Used:

Graphic laminate


Designer:

Nicole Chesney - Sky Water


Glazier:

Lucid - SPD


Related to:


Graphic


Private Residence - Rehoboth MA

Project Description:

Entertaining friends in an outdoor kitchen is what this designer had in mind when creating this space. The thick fused glass provides an organic looking feature that enhances the stonework in the island. This project shows off the glass in its natural state without the need for LED lighting.


Product Used:

1-1/2” Fused Low Iron Glass with “Riptide” texture


Glazier:

Lucid SPD


Related to:


Riptide

Fused


Private Residence - Chatham MA

Project Description:

A home in Chatham, MA was enhanced with the look of beach glass by installing fused standard clear glass onto a fully supported staircase. This simple design element was exactly what the homeowner was looking to do in bringing the beach into the house.


Product Used:

Fused Standard Clear Glass (naturally green hue) with “Beach” texture on the walking surface.


Designer:

JC Donald Co


Glazier:

Lucid - SPD


Related to:


Beach


Private Residence - Eastport NY

Project Description:

This beautiful summer residence on Long Island has feature in the foyer most homes don’t, a 6’ x 10’ low iron glass floor panel. The design element allows guests to view a wonderful car collection in the garage below as they enter the home.


Product Used:

Tempered Laminated Low Iron Glass with Lucid’s UL approved slip resistant top surface and SentryGlas Plus interlayers


Designer:

Eastbay Builders


Glazier:

Lucid - SPD


Related to:


Lucid Flooring

Installation Materials


Private Residence - Warwick RI

Project Description:

This impressive addition to a basically white décor adds elegance and function to a space previously used simply as a kitchen counter. LED lighting allows flexibility in color schemes during daylight and evening entertaining.


Product Used:

1-1/2” Fused low iron glass with “Riptide” texture, “Knobby” edge and LED light channel assembly


Glazier:

Lucid - SPD


Related to:


Riptide

Fused


Private Residence - Sea Girt NJ

Project Description:

Lucid’s Sea Glass was selected for this thick cast glass cocktail tabletop to create a clean, organic feature for this seaside home. The cast glass top was “double-polished” to bring out the clarity and texture within the glass while eliminating texture from the bottom surface. The result is a stunning centerpiece to the living room in this beautiful home.


Product Used:

1-1/2” Cast Sea Glass - “Crystal Clear” fire polished top, hand polished bottom and flat polished edges.


Designer:

Beloyianis Design


Photo Credit:

John Neitzel


Related to:


Seaglass


Business Office - Hope GA

Project Description:

This thick glass desk or table was built as an office desk. It is 72” x 36” and stands 29-1/2” tall. Both the top and legs are 1.5” Thick Fused Glass, made with low iron glass. The top has polished edges and our Sapelo Texture. The legs have textured edges and our Rocky Dunes Texture. A custom built metal frame holds it all together. The frame was left as unfinished steel, but can be painted any color or made with stainless for a different look. LED lighting can be easily incorporated but is not installed on this one. We can supply this desk complete, with metal frame and LED lighting.


Product Used:

Thick Fused Glass, 1.5” Thick


Designer:

Marshall Turner


Related to:


Fused


Dentist Office - Atlanta GA

Project Description:

Thick Fused Glass installed as a accent bar in a dentist office in Atlanta. Because the piece had to fit an existing space a template was made to provide a pattern. The only straight edge is the front one - all the others were a little off. But we were able to digitize the template and cut and polish the glass to fit perfectly!

This product is perfect for thick glass countertops, thick glass bars and thick glass tabletops.


Product Used:

Thick Fused Glass, 2” thick, Low-Iron with Waterwall Texture


Designer:

Farrington Design Group, Atlanta, GA


Glazier:

ITAGE Design Group, Tucker, GA


Related to:


Fused


Heavy Rain Raised Glass Bar

Project Description:

Lucid Glass Studio in East Providence, RI asked that we deepen our Ocean Spray Texture, so we created “Heavy” Ocean Spray. Lucid installed and added LED lights.


Product Used:

Heavy Ocean Spray Texture on 3/4” Low Iron Glass


Related to:


Ocean spray


Limited Warranty

Project Description:

Architectural Glass Flooring & Cast Glass provides a Limited Warranty on the products it sells. This Limited Warranty forms part of all Architectural Glass Flooring & Cast Glass transactions. Architectural Glass Flooring & Cast Glass does not install products and therefore the Limited Warranty applies to the product it produces and sells exclusively. See attached jpeg for full details.


Boxing

Project Description:

We build custom wood crates for each order. We use heavy lumber and if needed our crates are equipped with


Ted’s Montana Grill - Peachtree Cnrs GA

Project Description:

The glass in these exterior windows combines the beauty of cast glass with the strength of tempered glass and the energy efficiency of insulated glass units. Our “Basketweave” texture was fabricated in 1/4 “Evergreen” glass to achieve the effect our client was looking for.


Product Used:

1/4” Evergreen Cast and Tempered Glass- Basketweave Texture


Ted’s Montana Grill - Buckhead GA

Project Description:

“Basketweave” texture was utilized in fabricating 1” overall Insulated Units. 1/4” Evergreen glass was slumped, tempered and sealed into energy efficient units adding to the inside decor of Ted’s Montana Grill Restaurants.


Product Used:

1” Thick Insulated Glass Units made with “Basketweave” texture in Evergreen Glass


Glazier:

Parkway Construction


Private Residence - Jersey Shore NJ

Project Description:

We supplied glass railing for a private residence on the Jersey Shore to Maranatha Stairs & Rails of Wrightstown, NJ.


Product Used:

“Eel Grass” Texture on 1/2” Clear Tempered Glass


Glazier:

Maranatha Stairs & Rails


Related to:


Eelgrass


Federal Building - Oklahoma City OK

Project Description:

In addition to providing the glass flooring for this glass bridge, we also made the glass for these matching glass handrails. The glass we used was our Architectural Glass Flooring & Cast Glass’ “Reef” glass texture. We made one piece of 1/4” tempered “Reef” and laminated it to another piece of 1/4” Clear Tempered glass. By doing this we created a glass handrail 1/2” thick of tempered and laminated glass for beauty and safety.


Product Used:

1/2” Clear Cast, Tempered & Laminated Glass - “Reef” Texture


Glazier:

George Knox Glass Company, Oklahoma City, OK


Related to:


Reef


Omni Hotel - Atlanta GA

Project Description:

This major hotel project involved over 110 panels of our 1/2” Tempered Low Iron Glass with Lucid Glass Stusio’s’ “Marsh” texture. We developed this texture specifically for this project. The glass handrails are installed throughout the Grand Staircase as well as around the escalators at each floor.


Product Used:

1/2” Slumped, Tempered Low Iron Glass -“Marsh” texture


Designer:

Culpepper, McAuliffe and Meaders, Inc.


Glazier:

Fabmaster, Inc., Atlanta, GA


Related to:


Marsh


Private Residence - Saratoga CA

Project Description:

Our client wanted a “stained glass” design incorporated into a bathroom remodel. A design was decided upon and Architectural Glass Flooring & Cast Glass produced a mold and cast the glass. The result was a beautiful custom shower door with the “stained glass” appearance.


Product Used:

3/8” Cast and Tempered Glass - Custom Design


Private Residence - Lake Lanier GA

Project Description:

A beautiful bathroom shower enclosure with a custom “Sea Life” slumped/cast glass design.


Product Used:

3/8” Starphire Cast & Tempered Glass - custom “Sea Life “Texture.


Private Residence - Atlanta GA

Project Description:

The bath enclosure is used as a display in an high-end showroom frequented by interior decorators. It utilizes one version of our “Sea-Life” design which can feature salt water fish, whales, sea turtles and manatees along with other types of salt water inhabitants.


Product Used:

3/8” Clear Tempered Custom “Sea-Life” Texture


Related to:


Cast Textured


Private Residence - Villa Rica GA

Project Description:

This client lives on a farm and keeps Peacocks as a hobby. When she built her new home she wanted to include a Peacock somewhere in her design theme. The end result was this custom designed Peacock bath enclosure.


Product Used:

3/8” Clear Tempered Custom Design


Private Residence - Huntsville AL

Project Description:

Two panels of 3/8” Bronze Cast & Tempered Glass in “Dunes” Texture was utilized for the custom shower panels in our client’s custom built home.


Product Used:

3/8” Bronze Cast & Tempered Glass - Dunes Texture


Glazier:

Huntsville Glass Company - Huntsville AL


Related to:


Dunes


Private Residence - Atlanta GA

Project Description:

The client wanted a seven piece shower enclosure featuring Dolphins “swimming” across the various panels of glass. We provided a rough sketch of what we proposed and produced this one of a kind surround with the image of several “Spotted Dolphins” moving across the shower panels. Our client tells us that the owner loves the look of the Dolphins.


Product Used:

3/8” Clear Cast & Tempered Glass - Custom Dolphin Design


Designer:

Wayne Czechowski


Glazier:

Shower Solutions, Inc.


Private Residence - Ashville NC

Project Description:

Three panels of 3/8” Clear Tempered “Reef” cast glass was used as a bathroom divider in an upscale home in Ashville, NC. The glass panels were produced with holes in all four corners and the glass was installed using stationary clips. The panels provide an elegant and decorative separation between the shower area and the rest of the bathroom.


Product Used:

3/8” Clear Cast & Tempered Glass with “Reef” texture


Glazier:

Accurate Glass & Mirror - Hendersonville NC


Related to:


Reef


Eastside Physician’s Ctr - Snellville GA

Project Description:

Our client approached us with an idea for a project that involved waterfalls on either side of the main entry to this facility. She selected our “Waterwall” texture and we provided this texture in 3/8” Tempered “Waterwall” glass. We also provided holes on the top and the bottom of the glass to accommodate installation. The water flows down and over our glass and into a reservoir with lights at the bottom which illuminate our glass and the area around it.


Product Used:

3/8” Clear Tempered Glass - “Waterwall” Texture


Related to:


Waterwall


River Place II - New York NY

Project Description:

We were contacted to supply glass for an exterior waterfall application. Renovation plans for the building included a custom designed gym with a glass waterfall. LGS manufactured six panels of 1/2” Clear glass that we added our “Rippling” Texture to then tempered, sandblasted and sealed each panel. The result was exactly what the designer and owner had envisioned.


Product Used:

1/2” Clear Cast, Tempered & Sandblasted Glass - “Rippling” Texture


Related to:


Rippling


Greenwood Cemetery - Brooklyn NY

Project Description:

32 Panels of 3/8” Blue Cast & Tempered glass was used to construct two 30’tall waterfalls. The “Rippling” texture was developed by Wayne Czechowski specifically for use in waterfalls, his design allows the water to flow from panel to panel without “spitting” or spraying.


Product Used:

3/8” Blue Cast & Tempered Glass - Texture ” Rippling”


Designer:

Platt Byard Dovell White - Photos courtesy of Nikki Fuentes


Glazier:

Lynbrook Glass


Related to:


Rippling


Conference Room - Monroe GA

Project Description:

This 60″ × 60″ cast glass top with four 1/2” curved legs makes for a unique one of a kind table.


Product Used:

1/2” Low Iron Glass - Custom “Vakama” Texture


Angel Food Ministries - Monroe GA

Project Description:

Decorative glass etching was used to create a conference room table top with a corporate logo promoting the organization.


Product Used:

3/4” Clear Glass - Polished Edges & Sandblasted Logo


Designer:

Wayne Czechowski


Related to:


Graphic


Private Residence - Monroe GA

Project Description:

This residential table-top was made with our “Mixed Grilled” texture. Every project utilizing our custom “Mixed Grille” texture is a “one of a kind panel”. Our artist starts with a blank mold and begins making the texture using a combination of various mold materials. While the “feel” of this texture can be reproduced, no two panels are ever exactly the same.


Product Used:

1/2” Clear Glass with Custom Cast Glass “Mixed Grille” Texture


Related to:


Cast Textured


Private Residence - Lake Lanier GA

Project Description:

This large table top was custom designed to fit into a breakfast nook area in a home overlooking Lake Lanier just outside Atlanta, GA. Our client was interested in having a variety of sea life depicted in this table top to remind him of the time he spent at the ocean. Architectural Glass Flooring & Cast Glass was able to accommodate him by using several of our “Sea-Life” designs.


Product Used:

1/2” Clear Tempered Low Iron Glass with “Sea-Life” Design


Private Residence - Marietta GA

Project Description:

This custom shaped 3/4” Clear Glass Bar Top was designed to fit on a free standing bar. We furnished both the glass as well as the Stainless Steel Hardware for this project.


Product Used:

3/4” Clear Slumped “Reef” Texture


Related to:


Reef


Private Residence - Atlanta GA

Project Description:

Custom kiln cast bar top in a private condominium in Atlanta.


Product Used:

1/2” Clear custom “Diamond Dust” Texture


Glazier:

Glassworks, Inc. - Marietta, GA


Private Residence - Monroe GA

Project Description:

Creative interpretation of a Starfish is what makes this one of a kind Table Top spectacular! The owners can enjoy morning coffee or dinner on their deck overlooking a private lake.


Product Used:

3/8” Clear Tempered Custom “Starfish Texture”


Designer:

Wayne Czechowski


Private Residence - Dallas TX

Project Description:

Made from post industrial recycled glass, our Thick Bubble Glass for this table is 2” thick and has polished edges.


Product Used:

2” Thick Bubble Glass, Clear


Designer:

Williams Design, Inc.


Private Residence - Greensboro NC

Project Description:

The Allen’s had designed a beautiful counter/table top for their custom kitchen. Two panels of Super Gray Glass were fused and slumped together to manufacture the glass top which compliments the sculpted base.


Product Used:

1/2” Fused and Slumped Black Stacker Top


Photo Credit:

Photos courtesy of Sena Allen


Related to:


Fused


Marriott Marquis - Atlanta GA

Project Description:

We were asked to produce a heavy door entry system surround for the “SEAR” Lounge at the Marriott. We worked closely with the Architect and Installer on this project because the project was on an extremely tight completion schedule.


Product Used:

1/2” Clear Tempered Glass with “Eel Grass” Textured Side Lites and Transom


Glazier:

Harmon Contract Glazing - Atlanta GA


Related to:


Eelgrass


United Glass - Austell GA

Project Description:

The doors were produced as a focal point in the CEO’s office and conference room at this Glass Fabrication and Tempering facility. The 1/2” Bronze Tempered Glass with “Sandbar” texture and applied “Golden Iridescent Flat Jewels” separate the CEO’s office from his private conference room.


Product Used:

1/2” Bronze Tempered Glass with “Sandbar” Texture and Golden Round & Oval Jewels


Related to:


Sandbar


Monroe Medical - Monroe GA

Project Description:

Our client has a very busy Medical Center in Monroe, GA. As part of their office remodeling project they chose our 3/8” Bronze “Eel Grass” Textured Glass for the new doors to their conference room. The doors were installed using Brushed Nickle Hardware and large 2-3/8"diameter Crystal Ball handles. The glass is heavily textured for maximum privacy while allowing light to pass through into the adjoining hallway.


Product Used:

3/8” Bronze Cast & Tempered Glass - Eel Grass Texture


Designer:

Architectural Glass Flooring & Cast Glass


Glazier:

Wayne Czechowski


Related to:


Eelgrass


Angel Food Ministries - Monroe GA

Project Description:

Two doors leading to the conference room at Angel Food Ministries. The goal of the Ministries was to create privacy for their conference room while allowing natural light to filter into the area.


Product Used:

1/4” Clear Tempered “Reef” Texture


Designer:

AGF


Related to:


Reef


Susquehanna Radio - Atlanta GA

Project Description:

99X and Q100 are two radio stations owned by Susquehana Radio in Atlanta. When the decision was made to move to a new and larger studio the owner contacted us for ideas on how to make their new entrance to the building reflect what their station was about. We came up with the idea of including the call letters and logos of each of the stations into the two 1/2” glass doors in the entryway. After the doors were installed the DJ’s on both stations commented “on the air” about how great their new home was and that the part they liked best were their cool new doors.


Product Used:

1/2” Clear Tempered “Mist” Texture with Custom Logo’s


Related to:


Mist


Madison Builders - Conyers GA

Project Description:

Madison Builders are a very high end residential designer/builder who wanted a spectacular office and showroom in which to visit with potential clients. They built a plush area to visit with their customers and asked us to provide heavy glass doors with the Madison Builders logo in them for their entrance as well as cast glass for all of the doors in their offices. They wanted their logo to “stick out” of the glass which we were able to accomplish for them.


Product Used:

3/8” Low Iron Tempered with “Eel Grass” texture and custom logo.


Designer:

Madison Builders


Related to:


Eelgrass


CHS Building - Nashville TN

Project Description:

A custom cast “squares” texture was utilized in this commercial office project occupying the top floor of the CHS building in Nashville, Tennessee. Our 1/2” and 1/4” custom kiln cast textured tempered glass was used in office doors, side lites, heavy glass door entry systems and conference room walls throughout the top floor of the multi-story building.


Product Used:

1/2” & 1/4” Clear Tempered Glass with a custom square patterned texture


Glazier:

Baker Glass - Nashville, TN


Private Residence - Boca Raton FL

Project Description:

Using a motif of “Nature’s Elements” for this waterfront residence in South Florida, Metalwork Artisan, Glen Mayo set forth to design and fabricate this extraordinary installation by first creating a wonderful feeling of wave like curves using a Stainless Steel as the material for the architectural framing details then carefully selected three different textures of our cast glass which suggested exciting metaphors for the earth, ocean and sky.


Product Used:

3/8” Clear Cast Glass with Stainless Steel 120” w x 108” h custom textures including “Scupper”


Glazier:

Glen Mayo Artweld


Private Residence - Atlanta GA

Project Description:

A client came to us with a concept of what he wanted in a Divider Screen for this condominium. He was looking for something that would separate his pool table from the rest of the den without losing the wide-open affect of the large room. At the same time he did not want to completely block the view from one area to the other. We came up with a Cast Glass Divider Wall that included both clear and obscure cast and tempered glass panels and installed them using our stainless steel hardware at both the floor and ceiling. Then we attached additional panels of 1/4” tempered, cast, painted and tinted architectural glass to the three main divider panels using stainless steel standoffs through holes in the glass. We were able to create the exact feeling our client was looking for.


Product Used:

Custom Designed Texture, 1/2” and 1/4” Tempered Glass


BBDO - Atlanta GA

Project Description:

There were several different types of glass utilized for this Office Project including our custom textured cast glass. Also used were sandblasted and blue painted glass. Our glass was utilized to provide privacy without decreasing the warm feeling of natural light and as a focal point in the lobby, conference and media rooms.


Product Used:

3/8” Clear Tempered Glass - Custom Texture, Sandblasted and Blue Painted Glass.


Highlands Vinings West - Atlanta GA

Project Description:

3/8” Clear Cast & Tempered Glass using our “Erosion” Texture was used in the Sales Office of this high end Condominium located in Atlanta, GA.


Product Used:

3/8” Clear Cast & Tempered Glass - “Erosion” Texture


Glazier:

Glassworks of Georgia - Marietta GA


Deercreek Surgery - Kansas City MO

Project Description:

Clear Tempered “Waterwall” Texture glass was used to create a feeling of privacy throughout the reception area, waiting room and office areas of this medical facility. The 1/4” clear tempered glass was used in all of the partitions while 3/8” clear tempered glass was used for the moving glass panel at the receptionists desk.


Product Used:

1/4” & 3/8” Clear Tempered “Waterwall” texture


Glazier:

Binswanger Glass - Kansas City, MO


Related to:


Waterwall


Athens Medical Center - Athens GA

Project Description:

1/2” Clear Tempered “Waterwall” texture was utilized in a recent addition to this Hospital’s Emergency Care area. Our “Waterwall” texture was used to provide privacy to patients throughout the entire emergency room waiting areas.


Product Used:

1/2” Clear Tempered Glass with “Waterwall” Texture


Glazier:

Gresham Smith & Partners


Related to:


Waterwall


Amery Medical Center - Amery WI

Project Description:

“Scupper” texture was used on the partitions in the waiting room of this hospital to create a sense of privacy in the waiting area.


Product Used:

3/8” Clear Slumped and Tempered Glass - “Scupper” random circles texture


Glazier:

Rice Lake Glass, Rice Lake, WI


Related to:


Scupper


Angel Food Ministries - Monroe GA

Project Description:

We created a unique glass element called “Water Wave” for this project that was implemented to create flowing glass waves across the windows of the Angel Food Ministries coffee shop. Our “Water Wave” was cast into 3/8” Bronze Tempered Glass with two holes on each end of the glass allowing for use of stainless steel mounting hardware. Our glass was installed in front of the existing 1/4” clear storefront glass.


Product Used:

3/8” Bronze Tempered “Water Wave” glass with “Waterwall” texture.


Designer:

Wayne Czechowski


Glazier:

AGF


Related to:


Cast Textured

Waterwall


Doubletree Hotel - Ontario CA

Project Description:

“Coral” texture was selected for this private dining room. The organic texture of the glass provides privacy while allowing light to filter through. All of the glass was provided in 3/8” clear which was slumped and tempered.


Product Used:

3/8” Clear Cast & Tempered Glass - “Coral” Texture


Related to:


Coral


Mayo Medical Library - Rochester MN

Project Description:

Mayo Medical Library in Rochester, MN required a unique application of slumped and curved glass for their new medical library. Architectural Glass Flooring & Cast Glass created a curved glass wall to fulfill the vision of the designer.


Product Used:

1/2” Clear Slumped, Tempered and Curved Starphire Glass with “Reef” Texture


Glazier:

Calamar Manufacturing - Minneapolis MN


Related to:


Reef


Harrah’s Casino - New Orleans LA

Project Description:

Iridescent Flat Gems are attached to the front side of 1/2” Low Iron Tempered “Sandbar” texture glass to provide a distinctive look to the bar front of this Casino. The Iridescent Flat Gems are Teal and Amber colored and 1/2” to 1-1/2” diameter in 1/4” thick circles. When the glass is back-lighted you see the two colors specified. When the backlighting is off you see shimmering reflections in the Iridescent Flat Gems. This glass was installed one week before hurricane Katrina hit the New Orleans area.


Product Used:

1/2” Low Iron Tempered Glass - “Sandbar” texture Iridescent Flat Gems


Related to:


Sandbar


World Congress Center - Atlanta GA

Project Description:

This lounge at the World Congress Center in Atlanta is situated slightly off of the main walking areas in this large facility. They wanted the lounge to be visible to the crowds walking through the center. The design firm came up with an idea for a glass divider wall that could be seen by anyone in the area and that also worked to provide a quiet area for their customers on the other side of the glass wall.


Product Used:

1/8” Blue/Green Art Glass Laminated to 1/4” Clear Tempered Glass


Designer:

The Johnson Studio - Atlanta, GA


Glazier:

Action Glass & Mirror Co - Atlanta GA


Twist Restaurant -  Atlanta GA

Project Description:

An Atlanta Architect approached us with a rather unique glass design that he envisioned would provide a focal point in this new restaurant as well as divide the kitchen from the dining area. We were able to take his design and create it exactly in 1/2” Tempered Starphire Low Iron Glass. The client installed our glass with a fiber optic lighting system located below the bottom edge of the glass which slowly changes colors along the entire length of the glass.


Product Used:

1/2” Tempered Starphire Low Iron Glass custom slumped design


Roy’s Hawaiian Fusion - Atlanta, GA

Project Description:

The designer of this restaurant wanted to provide a modesty screen for people seated next to the exterior windows of this high-end restaurant. We created a special cast glass texture for this application and then sandblasted the glass to achieve a maximum level of privacy. The glass was used throughout the restaurant in both the doors and at the entry area to create a one of a kind appearance.


Product Used:

1/2” Low Iron Custom Cast Texture with Sandblasting


Research West - Laurel MD

Project Description:

24 decorative glass panels of 24″ × 24″ – 1/4” Bronze Cast & Tempered Glass installed using stainless steel standoffs.


Product Used:

1/4” Bronze Cast & Tempered Glass - “Coral” Texture


Glazier:

Buch Construction, Laurel, MD


Related to:


Coral


12 Atlantic Station - Atlanta GA

Project Description:

This chic, contemporary, modern hotel and condominium complex located in Midtown Atlanta offers numerous retail shops, movie theaters, cafes, restaurants and bars. With an abundance of foot traffic the owners wanted a glass screen installed separating the hotel check-in area from other areas of the complex. Three panels of 1/2” low iron glass with “Rippling” textured glass was utilized for this project.


Product Used:

1/2” Starphire Cast & Tempered Glass - “Rippling” Texture


Glazier:

Novare Group - Atlanta GA


Related to:


Rippling


Congregation Beth Torah - Overland Park KS

Project Description:

Two Thousand panels of 1/4” Clear Cast Glass – Classic Texture were supplied to the Congregation Beth Torah for their Memorial Art Glass Plaques. Each glass tile will be engraved with a donors name and displayed for the entire Congregation. A truly beautiful reminder of the lives that are an important part of the Beth Torah Congregation.


Product Used:

1/4” Clear Cast Glass - Classic Texture


Glazier:

Pearce Construction Co - Kansas City MO


Holy Apostles Adoration Chapel - Meridian ID

Project Description:

Two Panels 71″ × 102″- 3/8” Blue Glass was used to manufacture a feature wall for the Holy Apostles Adoration Chapel. The architect provided the design requirement and Wayne Czechowski then incorporated the pattern onto mold material and the design was then cast into the glass. Nick Guho stated that the “Holy Apostles Adoration Chapel is one of our most prized projects. We appreciate your diligence, quality of work and performance that all contributed to the overall success of our project.”


Product Used:

3/8” Blue Cast & Tempered Glass - Custom Design


Designer:

Insight Architects


Glazier:

Guho Corporation, Eagle, ID


Azia Restaurant - Greenville SC

Project Description:

1/2” and 1/4” thick Clear Cast & Tempered Glass was used in creating 23 panels of Waterwall Glass for the Azia Restaurant in Greenville, SC. The glass was installed as wall toppers that divide the dining areas as well as three large panels that divide the waiting area from the main dining room. Azia is a trend setting restaurant whose chefs use “fuzion” techniques to create a unique blend of modern cuisine for every palette.


Product Used:

Clear Cast & Tempered Glass - Waterwall Texture


Glazier:

SYS Contructors


Related to:


Waterwall


Lake Region Radiology - Fergus Falls MN

Project Description:

Our client required a unique dividing wall for the Radiology Center in the Lake Region Healthcare Center. 1/4” Evergreen Glass with a custom patterned texture was chosen for the larger panels and the LRH Radiology Services logo was sandblasted into 1/4” Clear Tempered Glass for the accent panels.


Product Used:

1/4” Evergreen Cast & Tempered with Custom Texture & Sandblasted Logo Panels


Glazier:

All Building Corporation, Fergus Falls, MN


"